Polycarbonate is a plastic that is used to make many things, including rc car bodies. It is very strong and durable, but it can be difficult to paint. The good news is that there are a few things you can do to make sure your polycarbonate body is clean and ready to be painted.
One of the most important things to do is to sand the body. This will help to create a smooth surface for the paint to adhere to. You can use a variety of sandpaper grits, but it is important to start with a coarse grit and then move to a finer grit. Once you have sanded the body, you will need to clean it with a mild soap and water solution.
Once the body is clean and dry, you can start to apply the paint. If you are using an airbrush, you will want to thin the paint so that it flows easily through the airbrush. You can also use a variety of painting techniques, such as sponging or stippling, to create a unique look.
Once the paint is applied, you will need to let it dry completely before moving on to the next step. Once the paint is dry, you can apply a clear coat to protect the paint and give it a shiny finish.
Painting polycarbonate rc car bodies can be a bit of a challenge, but it is definitely possible. With a little bit of preparation and the right tools, you can create a beautiful and unique paint job.
Other related questions:
How do you paint polycarbonate RC body?
There are a few methods that can be used to paint polycarbonate RC bodies, but the most common is to use a spray paint designed specifically for polycarbonate. These paints can be found at most hobby or hardware stores.
To begin, make sure that the body is clean and free of any dirt or debris. Once the body is clean, lightly sand the surface with a fine-grit sandpaper. This will help the paint to adhere to the body.
Next, apply a thin layer of primer to the body. Allow the primer to dry completely before moving on to the next step.
Once the primer is dry, you can begin to apply the paint. Apply the paint in thin, even layers, allowing each layer to dry completely before applying the next.
Once the paint is dry, you can apply a clear coat to protect the paint and give the body a glossy finish.
How do you prepare lexan RC body for paint?
There are a few different ways that you can prepare your lexan RC body for paint. One way is to use a sanding block or sandpaper to lightly sand the surface of the body. This will help to rough up the surface so that the paint will adhere better. Another way is to use a primer specifically designed for lexan bodies. This will help to create a smooth surface for the paint to adhere to.
Do you scuff RC bodies before paint?
Some people do, but it’s not necessary.
Bibliography
- How to clean lexan before painting? – R/C Tech Forums
- How Do You Clean A Lexan RC Car Body? A Step By Step …
- Best way prep a lexan shell? – General RC – MSUK-Forum
- How To Paint Clear Plastic RC Car Bodies – RaceNRCs
- Painting an RC Car Body, need some help | Hobbyist Forums